Plan your project

Lighting control in Southwest and Southeast Florida

Smart lighting control panels

Whole-home lighting control, designed with the light itself. Scintillax designs and installs smart lighting control panels for Florida homes: every lighting circuit wired back to one enclosure, then controlled from engraved keypads, a phone app or a schedule.

Design & installation · Southwest and Southeast Florida

Kitchen at night with cove, pendant, cabinet and toe-kick lighting set to one warm evening scene
One evening scene raises the cove, pendant, cabinet and toe-kick lighting together.

How a central system works

Every light, wired back to one place.

Instead of a dimmer behind every switch, a smart lighting control panel gathers the switching and dimming hardware into one enclosure. Keypads, the app and schedules all speak to the same system.

  1. The lights in each room

    Downlights, linear LED, cabinet and cove lighting, backlit stone, landscape and pool circuits. Each group of lights becomes one controllable zone.

  2. The panel

    Every zone is wired back to one enclosure. Breakers protect the circuits; relay modules switch them and dimming modules set their level.

  3. The controller

    A processor or gateway holds the scenes, schedules and logic. It joins your home network so the system can be reached from an app or hub.

  4. The way you control it

    Engraved wall keypads, a phone app, a touch screen or voice assistant, plus timeclocks and sensors that act on their own.

Illustration of a smart lighting control panelAn open electrical enclosure with numbered parts: a main breaker and surge protector, a row of branch breakers, a row of relay and dimming modules beside a controller with a display, terminal blocks with neutral and ground bars, a bundle of lighting circuits entering from below and a network cable leaving the top for the router.1234567
An illustrated panel layout for explanation. Enclosure size, module count and brand vary with the home and the selected system.

Inside the panel

What a lighting control panel holds.

The enclosure looks like a familiar electrical panel. The difference is what sits on its DIN rails: modules that switch and dim the lights, and a controller that gives them instructions.

  1. Main breaker and surge protection

    Isolates the panel and limits voltage spikes from storms and utility switching before they reach the electronics.

  2. Branch circuit breakers

    Protect each lighting circuit, as in any electrical panel. They are sized for the loads and wiring, and listed for branch-circuit protection (UL 489 in the United States).

  3. Relay and dimming modules

    DIN-rail modules that switch or dim each zone. The module type must match the fixture: phase dimming, 0–10V, DALI or another driver protocol.

  4. Controller or gateway

    Stores the programming and connects the modules to keypads, sensors and your network. The display shows status for service.

  5. Terminals, neutral and ground bars

    Organized connections that make each circuit easy to identify, test and service later.

  6. Home-run lighting circuits

    The wiring from each zone returns to the panel instead of stopping at a dimmer in the wall.

  7. Network connection

    Wired Ethernet is preferred for the controller; the app, hub and voice services reach the system through your router.

Centralized or in the wall

Choose the system around the project.

A central panel is not the answer for every room. Many homes combine a panel for the main living areas with wireless dimmers where opening walls is not practical.

ConsiderationCentral control panelSmart switches and dimmersSmart bulbs
Where the dimmers liveIn one ventilated enclosureIn wall boxes at each switch locationInside the bulb or fixture
What you see on the wallOne engraved keypad per entry or roomA bank of dimmers where several zones meetExisting switches, which must stay on
Best suited toNew construction and major renovationsRetrofits and room-by-room upgradesLamps and small, isolated changes
WiringEach zone runs back to the panel; keypads use low-voltage or wireless linksUses existing switch wiring in most roomsNo new wiring
ScaleDozens of zones and whole-home scenesPractical for a few rooms; harder to manage at scaleBest for a handful of lights
ServiceDimming hardware in one place, with manual override in the panelSpread across the houseReplaced lamp by lamp

What a smart lighting control panel does.

A smart lighting control panel for the home, also called a centralized, panelized or whole-home lighting control system, moves the switching and dimming hardware out of the walls and into one ventilated enclosure. Each zone of light, from kitchen downlights to a backlit onyx bar or the garden path, is wired to its own relay or dimming module. A controller connected to your home network turns those modules into scenes, schedules and app control. Scintillax plans the zones together with the lighting itself, so fixtures, drivers, modules and keypads are chosen as one system rather than assembled at the end.

Decide what each keypad should do.

Start with routines rather than hardware. Which lights come on together when you cook, entertain or arrive home late? What should happen at the front door, in the primary suite and on the stairs at night? One keypad button can recall a scene across several rooms, turn the whole house off or raise a low path of light. We draft a zone and scene schedule with you, then engrave the keypads in plain words so guests can use them without an app.

Match each module to its fixtures.

LED fixtures do not all dim the same way. Some dim on the power line with forward- or reverse-phase control; others need a separate 0–10V or DALI control signal, and color-changing tape may use DMX. The module in the panel must suit the driver in the fixture, including its minimum load and lowest stable level. We review driver specifications and loads for each zone, then test the low end so evening settings stay smooth and quiet.

Plan the wiring before walls close.

A central panel needs each lighting zone wired back to the enclosure, with low-voltage or wireless links to the keypads. That suits new construction and full renovations best. In a finished home, a hybrid often makes sense: a panel for areas that are open for work and wireless dimmers elsewhere, joined in the same app. We coordinate the wiring plan with your builder or electrician early, while ceilings and cabinetry are still accessible.

Give the panel a cool, accessible home.

Dimming modules produce heat, and each manufacturer specifies an operating temperature range; professional modules are commonly rated to about 104°F room temperature, and some must be derated above 86°F. In Florida, a hot garage or an exterior wall can be the wrong place, even though it is a common suggestion elsewhere. We look for a conditioned closet, utility room or approved condominium space with clearance for ventilation and service. The controller and network equipment belong nearby, ideally on a wired connection and a battery backup.

Keep it working through storms and outages.

Ask how the system behaves when the internet drops or power returns after a storm. Systems that run scenes locally keep keypads and schedules working without internet, while remote app access and voice control wait for the connection. Surge protection, battery backup for the controller and network, and manual override at the panel help the house stay usable. If you have a generator, decide which lighting circuits it should carry.

Choose the platform with service in mind.

Lighting control platforms range from dealer-installed systems such as Lutron HomeWorks, Control4 and Crestron to open standards such as KNX and DALI and app-based module systems. The right choice depends on the number of zones, the keypad style you prefer, integration with shades, audio or security, and who will support the programming later. Some platforms are sold only through authorized dealers, so we confirm the platform and installer arrangements for each project and document the panel schedule, zones and scenes at handover.

Light the stone, cabinets and garden from one system.

The control panel is where our lighting work comes together. Cabinet task light, coves and linear profiles, backlit countertops, stair accents, landscape and pool lighting can each become a zone with its own level, then join scenes such as Cooking, Dinner, Pool or Away. Backlit stone benefits from a smooth low setting, so the material glows rather than glares.

Bring your plans or your current switches.

For new construction, share the architectural and electrical plans, any lighting schedule and the builder's timeline. For an existing home, photograph the switch banks, the electrical panel and its circuit directory, and the fixtures you want to keep. Tell us which rooms matter most and how you want to use the app. We can then discuss a realistic scope, platform and installation sequence.

Bring the details together.

Your next step.

Share your plans or photographs of the switch banks, electrical panel and fixtures, your location and the routines you want to simplify. We will review the project and discuss a consultation. Licensed electrical work, permits and final pricing are confirmed for your specific home.

View all Southwest and Southeast Florida service areas.

Plan your lighting control

Before you begin

Your questions, considered.

Start with these planning details, then discuss the requirements of your own space.

What is a smart lighting control panel?

It is an enclosure, usually located near the main electrical panel, that holds the relay and dimming modules for your lighting along with a controller. Each lighting zone is wired to the panel, and wall keypads, an app or schedules tell the controller what to do. It is also called a centralized or panelized lighting control system.

Is a lighting control panel the same as a smart electrical panel?

No. Smart electrical panels and smart breakers mainly monitor and manage power use across the home, often alongside solar, batteries or backup power. A lighting control panel switches and dims lighting zones and recalls scenes. A home can have both, because they solve different problems.

Is a smart lighting control panel a touchscreen on the wall?

Not in this sense. In-wall touchscreens and smart switch panels are one way to operate lights. A smart lighting control panel is the enclosure that does the switching and dimming for the whole home, usually in a utility room. It can be operated from keypads, touchscreens, an app or voice control.

Can a central lighting control system be added to an existing home?

Often in part. Each zone must be wired back to the panel, so a complete central system is easiest during new construction or a major renovation. In a finished home, rooms that are open for work can join a panel while other rooms use wireless dimmers on the same platform. Photographs of switch banks, the electrical panel and access routes help us assess what is practical.

Will the lights still work if the internet goes down?

With systems that run scenes locally, keypads and schedules keep working without internet; remote app access and voice control return when the connection does. Confirm how the selected platform behaves, and plan battery backup for the controller and network equipment.

Do I still have switches on the wall?

Yes. Most rooms keep a wall keypad, often one engraved keypad in place of a bank of dimmers. A button can control a single zone, a room scene or the whole house, and the panel provides manual override for service.

Which LED fixtures work with a lighting control panel?

Most quality LED fixtures can, provided the module matches the driver: forward or reverse phase, 0–10V, DALI or another protocol. Compatibility, minimum load and the lowest stable dimming level are checked for each zone before fixtures are ordered.

What affects the cost of a smart lighting control system?

The number of zones, the share of dimming and switching modules, the number and finish of keypads, the platform, integration with shades or audio, wiring conditions and programming time. A zone and scene schedule prepared from your plans or photographs is the basis for a realistic proposal.

Who handles the electrical work and permits?

Electrical connections and any required permits are carried out by appropriately licensed professionals and confirmed for your project before work begins. Scintillax coordinates the lighting design, panel layout, programming and installation sequence with them.

Bring photographs, your project location and the details you would like to discuss.

Discuss your project

Build your material palette

Materials for this application.

Scenes change how stone and glass read after dark. Compare these finishes at the dimmed levels you plan to use, not only at full brightness.

Availability and suitability are confirmed for your project. Current physical samples and the required specification guide the final choice.